Process
Plasma Cutting
Hypertherm Plasma Machine
Hypertherm Powermax30 XP CE Standard Handheld Support
120-240 V CE standard, stock 088082, for Europe, Australia, New Zealand, RCM, Serbia, UK/UKCA, Ukraine, and other accepted countries. Duramax LT hand torch with 4.5 m (15 ft) lead and 4.5 m (15 ft) work clamp. This is a discontinued Powermax30 XP configuration; use Powermax33 XP for a current replacement machine and the Duramax LT support path for existing-machine parts.
DiscontinuedStock 088082CE Standard HandheldDuramax LTPowermax33 XP replacement
Recommended cut
10 mm (3/8 in)
Severance cut
16 mm (5/8 in)
Output range
15-30 A
Input power
120-240 V, 1-PH, 50/60 Hz
Duty cycle
35%, 240 V; 20%, 120 V
Machine Status and Replacement
Powermax30 XP owner support remains live for existing machines. Use the Duramax LT torch path for replacement torch parts and consumables; use the Powermax33 XP path when shopping for a new replacement machine.
Replacement machine: Powermax33 XP
Open Powermax33 XPWhat to Check First
- Powermax30 XP is discontinued. Use Powermax33 XP when you are replacing the machine, but keep this page for existing-machine parts and data.
- The brochure lists Duramax LT handheld packages plus a CSA mechanized configuration. Match stock number and setup before choosing torch or interface parts.
- Standard, FineCut, HyAccess, and mechanized consumables are different rows in the brochure. Match the installed torch and process before ordering.
Compatible Torches
Duramax LT hand torch / mechanized support
Handheld Powermax30 XP packages use the Duramax LT hand torch. The brochure also lists a CSA mechanized configuration that needs separate setup verification.
Open Duramax LT supportAccessory and Consumable Lookup
Duramax LT Torch Parts
Torch breakdown and replacement parts for the installed Duramax LT torch.
Open lookupStandard Consumables
Standard cutting setup for everyday Powermax30 XP work.
Open lookupFineCut Consumables
FineCut path for thinner material and cleaner detail work.
Open lookupHyAccess Consumables
Extended reach cutting and gouging path for tight access work.
Open lookupReplacement Torch
The brochure identifies the Duramax LT hand torch for handheld packages. Confirm the original stock number and connector before ordering a replacement torch assembly.
| Part number | Item | Notes | Buy / lookup path |
|---|---|---|---|
| 428174 | Duramax LT hand torch assembly | 15 ft lead; assembly includes one set of general-purpose consumables | View on Amazon View buy row |
Duramax LT Standard Consumables
Common wear parts for the Powermax30 XP standard cutting setup.
| Part number | Item | Notes | Buy / lookup path |
|---|---|---|---|
| 420116 | Shield/deflector | Standard Duramax LT shield/deflector | View buy row |
| 420114 | Retaining cap | Duramax LT retaining cap | View buy row |
| 420118 | Nozzle | 15-30 amp nozzle, pack of 5 | View buy row |
| 420120 | Electrode | 15-30 amp electrode, pack of 5 | View buy row |
| 420211 | Swirl ring | Duramax LT swirl ring | View buy row |
FineCut Consumables
FineCut parts for thinner material and cleaner detail work on the Powermax30 XP.
| Part number | Item | Notes | Buy / lookup path |
|---|---|---|---|
| 420115 | FineCut shield/deflector | FineCut Duramax LT shield/deflector | View buy row |
| 420114 | Retaining cap | Duramax LT retaining cap | View buy row |
| 420117 | FineCut nozzle | 15-30 amp FineCut nozzle, pack of 5 | View buy row |
| 420120 | Electrode | 15-30 amp electrode, pack of 5 | View buy row |
| 420211 | Swirl ring | Duramax LT swirl ring | View buy row |
Mechanized Consumables
The brochure lists a separate 30 A mechanized consumable row. WSP does not have a separate Powermax30 XP mechanized breakdown page yet, so these part links open verified part-search paths instead of guessing a handheld breakdown.
| Part number | Item | Notes | Lookup path |
|---|---|---|---|
| 220673 | Shield/deflector | Mechanized shield/deflector | Search this part |
| 420148 | Retaining cap | Mechanized / HyAccess retaining cap | Search this part |
| 420118 | Nozzle | 15-30 A mechanized nozzle, pack of 5 | Search this part |
| 420137 | Electrode | 15-30 A mechanized electrode, pack of 5 | Search this part |
| 420211 | Swirl ring | Duramax LT swirl ring | Search this part |
Mechanized Consumables
The brochure lists a separate 30 A mechanized consumable row. WSP does not have a separate Powermax30 XP mechanized breakdown page yet, so these part links open verified part-search paths instead of guessing a handheld breakdown.
| Part number | Item | Notes | Lookup path |
|---|---|---|---|
| 220673 | Shield/deflector | Mechanized shield/deflector | Search this part |
| 420148 | Retaining cap | Mechanized / HyAccess retaining cap | Search this part |
| 420118 | Nozzle | 15-30 A mechanized nozzle, pack of 5 | Search this part |
| 420137 | Electrode | 15-30 A mechanized electrode, pack of 5 | Search this part |
| 420211 | Swirl ring | Duramax LT swirl ring | Search this part |
Consumable Kits and Accessories
Kit rows link to the Duramax LT breakdown. Accessories without a breakdown open a part search placeholder.
| Part number | Item | Notes | Buy / lookup path |
|---|---|---|---|
| 851479 | Essential handheld consumable kit | Includes standard and FineCut consumables for Powermax30 XP | View on Amazon View buy row |
| 428243 | Standard combination kit | Includes 2 standard nozzles and 2 standard electrodes | View on Amazon View buy row |
| 428244 | FineCut combination kit | Includes 2 FineCut nozzles and 2 standard electrodes | View on Amazon View buy row |
| 428337 | HyAccess cut/gouging kit | HyAccess consumable kit for Powermax30 XP | View on Amazon View buy row |
| 428443 | HyAccess cutting starter kit | Cutting-only starter pack | View on Amazon View buy row |
| 428444 | HyAccess gouging starter kit | Gouging-only starter pack | View buy row |
| 127144 | Dust cover | Powermax30 / Powermax30 XP machine dust cover | View on Amazon Search this part |
| 127102 | Basic circle cutting guide | Compatible with Duramax, Duramax LT, AIR, and T30 torch paths | View on Amazon Search this part |
| 027668 | Deluxe circle cutting guide | Compatible with Duramax, Duramax LT, AIR, and T30 torch paths | View on Amazon Search this part |
Machine Packages and Configurations
The 2025 brochure lists six Powermax30 XP stock/configuration entries across CSA, CE, and CCC packages. Match the machine data plate and handheld versus mechanized setup before ordering.
| Stock number | Regional package | Included configuration | Package page |
|---|---|---|---|
| 088082 | 120-240 V CE standard Standard CE handheld package; verify the original package label before ordering machine-level items. |
Duramax LT hand torch with 4.5 m (15 ft) lead and 4.5 m (15 ft) work clamp | Back to Powermax30 XP support |
Parts Lookup Links
Hypertherm Torch Guide
Choose the installed torch before selecting consumables.
Open torch guidePlasma Consumables
Electrodes, nozzles, shields, swirl rings, cartridges, and kits.
Open consumablesFind My Part
Search by machine, torch, part number, or symptom.
Search partsFull Machine Specs
Catalog Specs
| Recommended cut | 10 mm (3/8 in) at 500 mm/min (20 ipm); 12 mm (1/2 in) at 250 mm/min (10 ipm) |
|---|---|
| Severance cut | 16 mm (5/8 in) at 125 mm/min (5 ipm) |
| Output range | 15-30 A |
| Torch output | 3.75 kW |
| Input voltage | 120-240 V, 1-PH, 50/60 Hz, ±10% |
| Input current at 3.8 kW | 120-240 V, 1-PH, 25.5-18.8 A |
| Rated output voltage | 125 VDC |
| Duty cycle at 40 C | 35% at 240 V; 20% at 120 V |
| Open circuit voltage | 256 VDC |
| Weight with 4.5 m torch | 9.5 kg (21.4 lb) |
| Dimensions with handles | 356 mm (14.0 in) D x 140 mm (5.5 in) W x 292 mm (11.5 in) H |
| Gas supply | Clean, dry, oil-free air or nitrogen |
| Recommended gas inlet | 113.3 l/min (4 scfm) at 80 psi (5.5 bar) |
| Input cable | 3 m (10 ft) |
| Power supply type | Inverter - IGBT |
| Engine drive requirement | 5.5 kW for full 30 A output |
| Recyclability | 100% |
| Warranty | Power supply: 6 years; torch: 1 year |
Next Step
Use the compatible torch card first. Consumables and replacement parts should be chosen from the torch or cartridge path, not guessed from the machine name alone.
Need More Help?
Cut Quality
Start with the consumable or cartridge path, then verify air quality, torch seating, ground clamp, and process settings.
Older Powermax Pages
Use the older Powermax support pages when the machine is not part of the current catalog family.
Search
Use Find My Part for part numbers, cartridge numbers, torch names, or machine model searches.
Source: Hypertherm Powermax30 XP brochure 860450, Revision 7, September 2025. This page isolates stock 088082: 120-240 V CE standard, for Europe, Australia, New Zealand, RCM, Serbia, UK/UKCA, Ukraine, and other accepted countries. The brochure identifies the package configuration above; Powermax33 XP is the current replacement-machine path.