Arc Air Gouging Rod Selection

Home > Carbon Arc Support Main > Arc Air Support > Arc Air Gouging Rod Selection

Arc Air Gouging Rod Selection

DC Jetrod® Copperclad Jointed Electrodes

Eliminates stub loss and provides continuous electrode feed especially for semi-automatic and automatic torches. Machined at each end to provide male and female fittings.

Part#	Electrode Size	Amperage Requirement
24-052-003	5/16 x 14 in (7.9 x 356 mm)	350-450 Amp DCEP
24-062-003	3/8 x 14 in (9.5 x 356 mm)	450-600 Amp DCEP
24-082-003	1/2 x 14 in (12.7 x 356 mm)	800-1000 Amp DCEP
24-102-003	5/8 x 14 in (15.9 x 356 mm)	1000-1250 Amp DCEP
24-122-003	3/4 x 14 in (19.1 x 356 mm)	1250-1600 Amp DCEP
24-064-003	3/8 x 17 in (9.5 x 432 mm)	450-600 Amp DCEP
24-084-003	1/2 x 17 in (12.7 x 432 mm)	800-1000 Amp DCEP
24-104-003	5/8 x 17 in (15.9 x 432 mm)	1000-1250 Amp DCEP
24-124-003	3/4 x 17 in (19.1 x 432 mm)	1250-1600 Amp DCEP
24-164-003	1 x 17 in (25.4 x 432 mm)	1600-2200 Amp DCEP

DC Copperclad Pointed Electrodes

A standard all purpose gouging electrode. Controlled copper coating improves conductivity providing more efficient, cooler operation and helps maintain electrode diameter at the point of the arc.

Part#	Electrode Size	Amperage Requirement
22-023-003	1/8 x 12 in (3.2 x 305 mm)	60-90 Amp DCEP
22-983-003	5/32 x 12 in (4.0 x 305 mm)	90-150 Amp DCEP
22-033-003	3/16 x 12 in (4.8 x 305 mm)	200-250 Amp DCEP
22-043-003	1/4 x 12 in (6.4 x 305 mm)	300-400 Amp DCEP
22-053-003	5/16 x 12 in (7.9 x 305 mm)	350-450 Amp DCEP
22-063-003	3/8 x 12 in (9.5 x 305 mm)	450-600 Amp DCEP
22-082-003	1/2 x 14 in (12.7 x 356 mm)	800-1000 Amp DCEP

AC Copperclad Pointed Electrodes

Designed for use with AC power supplies. Rare earth material is added to stabilize the arc, improving the operating characteristics.

Part#	Electrode Size	Amperage Requirement
20-033-003	3/16 x 12 in (4.8 x 305 mm)	200-250 Amp AC
20-043-003	1/4 x 12 in (6.4 x 305 mm)	300-400 Amp AC
20-063-003	3/8 x 12 in (9.5 x 305)	350-450 Amp AC

DC Plain Pointed Electrodes

General purpose electrodes without the copper coating. Used on applicationswhere copper is considered detrimental.

Part#	Electrode Size	Amperage Requirement
21-983-003	5/32 x 12 in (4.0 x 305 mm)	90-150 Amp DCEP
21-033-003	3/16 x 12 in (4.8 x 305 mm)	200-250 Amp DCEP
21-043-003	1/4 x 12 in (6.4 x 305 mm)	300-400 Amp DCEP
21-053-003	5/16 x 12 in (7.9 x 305 mm)	350-450 Amp DCEP
21-063-003	3/8 x 12 in (9.5 x 305 mm)	450-600 Amp DCEP
21-083-003	1/2 x 12 in (12.7 x 305 mm)	800-1000 Amp DCEP
21-103-003	5/8 x 12 in (15.9 x 305 mm)	1000-1250 Amp DCEP

DC Copperclad Flat Electrodes

Specially designed for close tolerance metal removal. Excellent for removing weld crowns, repairing or making dies, removing welded dogs and scarfing billets.

Part#	Electrode Size	Amperage Requirement
35-099-003	3/8 x 5/32 x 12 in (9.5 x 4.0 x 305 mm)	250-350 Amp DCEP
35-033-003	5/8 x 3/16 x 12 in (15.9 x 4.8 x 305 mm)	300-500 Amp DCEP

© Copyright 2019 Mobirise - All Rights Reserved

‌

No Code Website Builder